Image

Canton, MA – Horton / Ford F550 Type I Ambulance

Project Manager: Chris Gagnon Delivery Date: February 17, 2025 Vehicle Highlights Include: -173” Custom Module Body. -72” Headroom -Ford F550 4x4 chassis -Custom ALS Patient area interior -Horton I4G Electrical system. -Electronic Privacy Glass -Horton Occupant Restraint System HOPS -MBrace 4-point restraint system -Stryker Power Load and Power Pro 2 cot -Whelen M Series Warning light system and Freedom light bar. -Cool Tech II HVAC with Solar panel. -HVAC ducted above Main wall.

Hampton, NH – Two (2) E-One Custom Pumpers (E5 & E6)

Project Manager: Bob Bernard Delivery Date: February 13, 2025 Engine 5 Engine 6 Features: 2025 Typhoon long cab chassis Cummins L9 450 HP motor Allison Transmission Galvanized frame rails, crossmembers Cab seating for four EMS cabinets Brow and rear door scene lighting Scene pole lights on body Tool mounting in cab Rear facing cab wall windows for scene safety Seat material is Durawear Plus, zip clean Hale Qmax1500 pump UPF poly tank 740-gallons 40-gallon foam cell with Class 1 2.1A foam system Decon discharge Low hosebed with four rear discharges Front suction Front trashline Aluminum hosebed cover…

Sebago, ME – AFT Rescue Pumper

Project Manager: Chris Champagne Delivery Date: February 11, 2025 Features: E-One/Spartan AFT cab with seating for 6 10” raised roof Galvanized frame system Cummins L9 450 HP engine, Allison EVS 3000 transmission Hale Q-Max 1500 GPM pump UFP 1000 gallon tank Class A- foam Front suction with MIV valve and dedicated Trident primer E-One all stainless steel, 304L body Internal storage for ladders and suction hose Whelen warning and scene lighting

Three Rivers, MA – C.E.T. Brush Truck

Project Manager: Mike Nugai Delivery Date: February 9, 2025 Features: Ford F550 crew cab chassis GVW of 19,500 pounds 7.3L V8 motor Designed for off road use Buckstop heavy duty front bumper “Super Single” tires including a 3 ½ lift kit Skid plate protection Winch in case it goes a little too far into the brush 300 tank with cross lay Rear hose storage and a booster line Front sweep nozzles The body has multiple storage compartments Transvers compartments for long tools Side compartments for storage Custom-built compartment for Indian tank storage The compartments are all aluminum diamond plate…

Mashpee, MA – E-One HR100 Ladder

Project Manager: Bruce King Delivery Date: February 7, 2025 Features: E-One Typhoon medium cab w/notched roof. Cummins X12 500hp motor w/EVS 4000 Transmission. HR 100’ ladder w/pined waterway,500lb tip load and tip controls. Hale 1500gpm QMAX pump. 500gal UPF tank. 12’ jack spread w/zinc coated leg beams. Zinc coated frame rails and torque box. TFT 1000gpm RC ladder pipe. Whelen lighting package. Right side and rear cameras. Driver/Officer Vista Displays. Cab EMS compartment.

Mass Development – Devens, MA – Horton / Ford F550 Type I Ambulance

Project Manager: Brian Zarlenga Delivery Date: February 5, 2025 Features: 2024 Ford 550 4x4 Horton 623 Aluminum body Liquid Spring suspension 74” Interior headroom CG Tech interior Horton I4G system Negative pressure Whelen emergency light package

Lexington, MA – Horton / Ford F550 Type I Ambulance

Project Manager: Brian Zarlenga Delivery Date: February 4, 2025 Features: 2024 Ford 550 4x4 Horton Type 1 Ambulance Horton I4G+ System Liquid Spring suspension Cool Tech II HVAC system Whelen M series LED emergency light package

Rye, NH – E-One / Ford F600 Quick Attack

Project Manager: Chris Champagne Delivery Date: January 31, 2025 Features: A Hale 1250 GPM class A rated pump LDH discharge and deck gun 450 gallon poly water tank ROM painted roll up doors 3/16” 5052 aluminum body Custom storage for air bags, rolled hose, and tool Shelves/trays/swing out toolboard installed at Greenwood Whelen warning and scene lighting

Easton, ME – E-One International Tanker-Pumper

Project Manager: Tom Shook Delivery Date: January 29, 2025 Features: International 4-door HV607 6×4 cab Seating for 5 with 4 SCBA seats Cummins L9 450HP engine Hale DSD 1250 GPM single stage pump Class 1 Foam System 3000-gallon UPF water tank Stainless steel Newton swivel dump Zico portable tank lift E-ONE steel body with 20-year structural warranty

Norton, MA – Horton / Dodge RAM 5500 Type I Ambulance

Project Manager: Keith Jackson Delivery Date: January 27, 2025

Marion, MA – E-One HR100 Ladder

Project Manager: Brian Zarlenga Delivery Date: January 21, 2025 Features: E-One Typhoon chassis Cummins L9 450HP Motor EVS 3000 Transmission 420 AMP Leece Neville Alternator Hale 1500 GPM Pump TPG Class 1 Pressure Governor 470-Gallon UPF Water Tank Trident Primer Advanced Aerial Control System 3/16” Aluminum/Extruded Cab 100’ Aluminum Ladder Whelen Warning Light Package

General Dynamics Electric Boat – Wheeled Coach Type III Ambulance

Project Manager: Chris Gagnon Delivery Date: January 14, 2025 Features: G4500 Chevy chassis 170” Wheeled coach aluminum module body. Roll-Tech safety air bag system. IMMI per4max seat belt restraints Cool Bar external aux condenser. Whelen M Series emergency lighting. Stryker Power Load system and Power Pro II Cot.

Plymouth, MA – Two (2) E-One Custom Pumpers

Project Manager: Mark MacDonald Delivery Date: January 9, 2025 Features: The two new pumpers are powered by Cummins X-12 500hp engines Allison EVS4000 series transmissions, and are built with Hendrickson FireMaax air ride suspensions Other features include: Aluminum wheels Driver and officer side medical cabinets with inside/outside access Barrier style cab doors Auto lube systems Triple x-lays Aluminum hosebed covers SCBA and wheel chock storage compartments in the wheel wells Waterous CSU 1500gpm pumps 1000 gallon water tanks Trident air primers 30 gallon foam cells and external eductor set ups Vista IV displays for both the driver and…

Plainfield, MA – E-One Custom Pumper

Project Manager: Mike Nugai Delivery Date: January 8, 2025 1250 Hale Pump/ 1250 water tank 30-gallon foam cell A front jump line and lower speedlays for attack line deployment Top mounted pump panel will keep the pump operator off the road with a full view of the fire scene Custom compartments Emergency and scene lighting was provided by Whelen On Spot chains Heat pan for the pump housing area The body features include pan doors with custom compartments Interior ladder storage and drop tank storage along with a full hose bed and rear dump valve

Dracut, MA – E-One Custom Pumper

Project Manager: Brian Zarlenga Delivery Date: January 7, 2025

Standish, ME – E-One / International Pumper-Tanker

Project Manager: Chris Champagne Delivery Date: January 02. 2025 Some of the key features of Tank 3 are: Custom specified International HV 613 heavy duty chassis International A-26 motor with 515 HP and Allison EVS 4000 transmission 11 ¼” tall galvanized super single frame, with job color top coat paint Aluminum wheels Air ride suspension E-One stainless steel body, tank frame, and pump module Large custom designed storage compartments Zico lifts for ladders, suction hoses, and folding water tank Rear stainless steel newton swivel dump 4” fireman’s friend direct tank inlet Hale 1500 GPM pump Akron valves Class 1 pressure…

Stratham, NH – Horton / Ford F550 Type I Ambulance

Project Manager: Chris Gagnon Delivery Date: December 30, 2024 Highlights include: 173” Module body. Ford F550 4x4 chassis Liquid spring suspension. Horton occupant protection system. Custom ALS interior configuration. Whelen M series emergency lighting package.

Manchester, NH – E-One Custom Pumper

Project Manager: Chris Champagne Delivery Date: December 19, 2024 Some of the key features of Engine 4 are: Custom heavy duty formed steel bumper with recessed mounts for warning lights, Q2B and front intake E-One Cyclone 100” wide extruded aluminum cab with 4” front and 12” rear vista roof 12” tall heavy duty galvanized and painted frame system IMMI front and side impact airbags Bostrom seating for 4 Hale 1750GPM Q-Max Hale vernier throttle and discharge relief valve Hale MIV valves for side and front intakes Heavy duty extruded aluminum body with low access hosebed and crosslays All aluminum…

Marlborough, MA – E-One Custom Pumper

Project Manager: Scott Smith Delivery Date: December 17, 2024 This truck features: E-One Typhoon Severe Duty Chassis Hale 1500gpm pump 750 gallon water tank Cummins L9 450hp Engine Hot Dip Galvanized Frame Whelen Scene Lighting Low Hosebed

Warwick, RI – Two (2) E-One Custom Pumpers

Project Manager: Colin Boutin Delivery Date: December 11, 2024 The new Pumpers Include the following features: E-One’s Severe Duty Typhoon cab w/ flat roof E-One severe Duty 3/16” extruded aluminum roll-cage cab Barrier style cab doors Severe service dash, overhead, and engine cover Bostrom Seating with Bostrom Secure-All SCBA Brackets Heavy duty front bumper with recessed Q2B siren and quick attack jump line Cummins Engines E-One’s Galvanized Frame Rail and Extensions Geomet coated fasteners and nano-protect spray coatings for extra corrosion protection. Federal Signal lighting package Firetech Scene Lighting

Lawrence, MA – E-One HR100 Aerial

Project Manager: Scott Smith Delivery Date: December 9, 2024 This truck features: E-One Typhoon Severe Duty Chassis E-One Heavy Duty 100’ Aerial Hale QMax 1500gpm pump 500 gallon water tank Cummins X12 500hp engine An AMAZING 11’ Jack Spread Hot Dip Galvanized Frame AND Torque Box! Whelen Scene Lighting

Concord, MA – Horton / Ford F550 Type I Ambulance

Project Manager: Keith Jackson Delivery Date: December 6, 2024

Boston, MA – E-One Metro 100 Ladders (L11 & L7)

Project Manager: Mark MacDonald Delivery Date: December 4, 2024 Features: E-One’s Severe Duty Typhoon Cabs E-One’s extruded roll cage design and 3/16” aluminum Front disc brakes Electronic stability control Heavy-duty inner-city bumpers Zinc flame spray coating on the integral torque box for added corrosion protection Barrier style doors Line x cab steps Custom Whelen scene and warning lighting packages Federal Q2B sirens Federal Rumbler secondary sirens Each truck carries a complement of 265’ of ground ladders

E-One Custom Pumper – Stock#146424

North Berwick, ME – E-One Custom Pumper

Project Manager: Chris Champagne Delivery Date: November 21, 2024 Features: Typhoon long cab with custom designed interior equipment storage compartment Diamond plate flooring for added durability Galvanized frame system for corrosion resistance Cummins L9450HP engine with Allision EVS3000 transmission Hale Q-Max 1500 GPM Pump Foam Pro Class A foam system Internal MIV valves with additional Trident primers to facilitate drafting offboard while pumping from the tank. 1000 gallon UPF tank 30 gallon foam cell Extruded aluminum rescue body with internal storage of ladders and suction hoses Enclosed pump panels E-One FF Decon discharge Whelen warning and scene lighting Custom…

Yarmouth, ME – E-One Custom Pumper

Project Manager: JR Carter Delivery Date: November 19, 2024 Features: Cyclone 100” wide heavy duty cab 4” front raise and 12” rear raise roof for additional headroom Long cab with exterior compartments for quick access to equipment 12” tall, galvanized frame system for added strength and longevity Cummins L9 450 HP engine, Allison EVS 3000 transmission E-One 304L stainless steel body with stainless subframe, tank frame, and pump module. 750 UPF water tank, 30 gallon foam cell Lowered hosebed design for increased ground level access to hose loading Hale Q-Max pump Akron valves Whelen warning and scene lights Akron Apollo…