North Branford, CT – E-One HP100 Quint

Project Manager: Mike Pinto Delivery Date: December 28, 2023   Features: Typhoon cab Cummins 565HP X15 Motor with Allison EVS4000 Integral torque box chassis 300 gallon water tank 2000 GPM Hale QMAX 100’ welded extruded aluminum aerial rated at 1,305 lb dry; 805 lb wet Crisscross underslug jacking system with short jack Advanced Aerial Control System with body protection Auto Jacking and Auto Leveling Whelen Warning and Scene lighting
Continue Reading

Fall River EMS – Wheeled Coach G4500 Type III Ambulance

Project Manager: Chris Gagnon Delivery Date: December 20, 2023 Features: • 2023 Chevy G4500 chassis • 170” Wheeled Coach module body. • 72” interior head room • Power door and compartment locks • LED Compartment lighting • Lon Seal – Lonplate II flooring • Built in Bio waste at head of bench. • RollTek Safety Air Bag system • Back up and patient rea cameras • Whelen M Series Emergency lighting package. • Coolbar external Heat/AC combo condenser  
Continue Reading

South Shore Health EMS #1 – Wheeled Coach Ambulance

Project Manager: Bob Mahoney Delivery Date:  December 18, 2023   Features: Chevy G3500 Patient compartment has the ALS configuration Coolbar for enhanced cooling capability ALS Configuration which gave the vehicle a curbside tower at the side entry door Curbside splint cabinet Rear wall cabinet CPR seat with dedicated are for the Cardiac monitor.
Continue Reading

Barrington, RI – E-One Custom Pumper

Project Manager: Brian Zarlenga Delivery Date: December 8, 2023   Features: E-One Typhoon Chassis 80” Long cab with external storage compartments L9-450hp Cummins Engine Allison EVS3000 Transmission 3/16” Aluminum Cab and Body  Waterous CSU 1500 GPM Pump 750-Gallon UPF Water tank 30-Gallon Foam tank
Continue Reading

New Salem, MA – E-One FC94 Rescue Pumper

Project Manager: Mike Nugai Delivery Date: December 4, 2023   Features: 1500 Hale GPM 1000 tank with a rescue body built on the FC94 chassis. Full LED emergency lightning package; brow light and scene lighting Federal “Q" Front trash line Two cross-lays LDH discharge and deck-gun discharge 7 ROM roll up doors with enclosed ladder storage on the right side Customized compartments with trays, shelving, and mounting of specific equipment Wiring and outlets were added for the department’s battery-operated equipment The cab was customized to include mounts for hand tools and extinguishers A compartment was added to the hose-bed to…
Continue Reading

Worcester, MA – (2) E-One Custom Pumpers: Engine 11 & Engine 13

Project Manager: Colin Boutin Delivery Date: December 1, 2023    Features: Worcester E11 & E13 Pumper Features: Typhoon Medium Cab 3/16” Roll Cage Cab Design 170” Wheelbase Galvanized Frame and Cross Members Severe Duty Cab Interior Bostrom Seating for 6 FireMAAX Air Ride Rear Suspension Hale QMAX 1500 GPM Pump 500 Gallons Water 30 Gallons Foam 3/16” Extruded Aluminum Body ROM roll up doors Quick release cargo net covers 7 SCBA Bottle and Wheel Chock Body Storage Internal Vertical Ladder Tunnel Low Hosebed design Lowered Crosslays Whelen Warning Light Package and Lightbar
Continue Reading

Blackstone, MA – E-One Custom Pumper

Project Manager: Mark MacDonald Delivery Date: November 1, 2023   Features: Cummins L-9 450hp engine Allison EVS 3000 transmission Front bumper hose tray LED headlights Custom Greenwood built medical cabinet installed in the rear of the cab Q2B siren, aluminum wheels 72” Firetech brow light Front disc brakes Galvanized frame rails Hale QMax XS 1500gpm pump 1000 gallon water tank Trident air primer Custom jaws tool mounting set up Custom Whelen warning and scene lighting package Whelen TAL65 traffic advisor, and a back up camera system for added safety!
Continue Reading

Fairhaven, MA – E-One Custom Pumper

Project Manager: Colin Boutin Delivery Date: October 6, 2023   Features Include: E-One Severe Duty Typhoon w/ 12” Vista Roof 3/16” Extruded Aluminum Long Cab w/ Transverse Storage 3/16” Extruded Aluminum Low Hosebed Body Top Mount Pump Design Galvanized Frame and Supports Cummins L9 450HP Engine / EVS 3000 Transmission 1500GPM Hale QMAX Pump 780 Gallon Water Tank Federal Warning Light Package FireTech Scene Lighting Internal Ladder and Suction Hose Storage Roof Top Storage B1 Compartment Mounted Hose Reel Vanner 2600 Watt Inverter
Continue Reading

Warwick, RI – E-One 95’ Platform

Compartments / Interior Photos:   Project Manager: Colin Boutin Delivery Date: October 2, 2023 The new MM95 Includes the following features: • E-One’s Severe Duty Typhoon cab w/ flat roof • E-One severe Duty 3/16” extruded aluminum roll-cage cab • Barrier style cab doors • Severe service dash, overhead, and engine cover • Bostrom Seating with Bostrom Secure-All SCBA Brackets • Heavy duty front bumper with recessed Q2B siren and quick attack jump line • Cummins X15 engine • E-One’s Galvanized Torque Box and Outriggers • Geomet coated fasteners and nano-protect spray coatings for extra corrosion protection. • Federal Signal…
Continue Reading

Newport, ME – E-One Custom Pumper

Project Manager: Tom Shook Delivery Date: September 28, 2023   Some of the features of this E-One AFT series pumper are: Spartan Chassis Cummins L9 450HP Galvanized frame rails Seating for 6 Firefighters Hale Q-Max 1500 GPM pump Class 1 pressure governor Class 1 2.A Foam system Direct tank fill 1000 gallons of water 30 gallons of Class A foam Apollo Hi-Riser deck gun Blitzfire monitor SetCom headset system Whelen emergency light package Firetech scene lights  
Continue Reading

Casco, ME – E-One Rescue Pumper

  Project Manager: Chris Champagne Delivery Date: September 13, 2023   Some of the features added to this E-Max to suit Casco’s specific needs are;: Front suction with internal MIV valve and dedicated Trident air primer specifically routed to the suction Enhanced warning package with all Whelen LED warning lights, Q2B siren, Electronic siren with 2 speakers, and LED Roto Ray to clear a path to emergencies Whelen LED scene lighting on all sides of the apparatus to provide high output 12 volt illumination while enroute or on a scene Typhoon severe duty cab with enclosed cab storage compartments with…
Continue Reading

Walpole, MA – (2) E-One eMax Rescue Pumpers

Project Manager: Mark MacDonald Delivery Date: August 31,2023 Features: Aluminum wheels, front and rear disc brakes Ramco mirrors Heavy duty bumpers, galvanized Powder-coated, and painted frame rails Galvanized frame extensions Cross members and battery brackets for the ultimate in corrosion protection. They are powered with Cummins L-9 450hp engines and Allison EVS 3000 transmissions. The Emax rescue pumper body has a custom shelf and tray package Aluminum hosebed covers Custom Whelen warning light package Whelen and FireTech scene lighting Each truck features a Darley 1500 gpm pump 530 gallon UPF water tank TFT Hurricane remote controlled 1250 gpm monitor, along…
Continue Reading

Cape Elizabeth, ME – Horton / Ford F550 Type I Ambulance

Features: Ford E-450 chassis Horton all aluminum ambulance body Horton HOPS occupant restraint system for unparalleled crew safety Liquid spring suspension Power load lift system Custom box layout to suit Cape’s specifications and needs     Project Manager: Chris Champagne Delivery Date: August 23, 2023
Continue Reading
1 2 3