E-One Fire Apparatus – Page 12 – Greenwood Emergency Vehicles, LLC

Commercial Pumper

E-ONE commercial pumpers offer the perfect combination of Quality, Performance and Flexibility to meet your department’s operational and budgetary needs. Quality – commercial pumpers are fully engineered for prompt delivery, easy service and reduced cost over the life of your department’s apparatus. Performance – E-ONE partners with the most reliable commercial chassis manufacturers in the industry to pair with our proven extruded aluminum body design. Flexibility – commercial pumpers offer a variety of storage options, compartment configurations, uniquely designed shelves, trays and pull-out boards to keep your ladders and equipment clean and protected from the elements as well as easy…

Rear Mount

With the E-ONE® rear-mount pumper, the operator has full view of the scene due to the rearward, side-facing or rear pump panel design. By placing the pump and the pump operator panel at the rear of the apparatus, the wheel base is significantly reduced, improving maneuverability. This makes the E-ONE rear-mount pumper ideal for getting around narrow street corners and subdivisions. This configuration is available with tank capacities up to 1030-gallons along with internal and external storage for NFPA ladders and equipment. Quest®, Cyclone® II, hush® mid-Engine, Typhoon® or commercial chassis available Hale®, Waterous® or Darley® pumps; foam and…

Rescue Pumper

E-ONE® Rescue pumpers feature the same versatility, durability and safety found in each E-ONE pumper but offer more room for vital equipment. With a wide variety of internal storage options to keep your fire suppression and rescue equipment organized and protected from the elements, the E-ONE Rescue pumper allows you to fight fires and respond to all the emergencies in between. Quest®, Cyclone® II, Typhoon®, or commercial chassis available Side-mount or Top-mount pump controls Hale®, Waterous® and Darley® pumps; foam and CAFS available 530- to 1,280-gallon water tank capacity - rectangular tank allows for full height/full depth compartments and/or ground…

Super Tiller

The E-ONE Super Tiller with V-Max® cab is a 100 ft. tillered aerial ladder boasting a 550 lb tip-load at the end while flowing water in all positions. V-Max Cab is designed for optimal visibility and has an enclosed flip-up “buddy seat” for driver training. The tiller cab also features air-conditioning, heat and defrost as standard. The air ride tiller axle and custom-designed steering system are engineered to enhance the tiller’s maneuverability on congested, uneven streets. The Super Tiller also offers a single set of outriggers with 17’-6” jack spread, standard short jack system for deployment in confined spaces and…

HP 100

With a 500 gallon water tank, this first responder is ready to fight the moment it arrives on scene. The HP 100 has a structural safety factor of 2.5 to 1, exceeding NFPA requirements. The HP 100’s body is available in a traditional center hosebed or the sought after SideStacker®We also offer a truck company body option, with no pump or tank, which makes the HP 100 a valuable asset to any department. Structural Safety Factor: 2.5 to 1 Jack Spread: 12' Wheelbase: 230" Gallon Water Tank: 500 FEATURES CUSTOM CHASSIS Quest® or cyclone® II chassis Medium, long and extended length…

95 Platform

The 95 Platform performs with a narrow stabilizer spread, expansive compartment space, easy-to-use SideStacker® hosebed and low maintenance aerial that all combine to provide a reliable, hardworking platform. The 95 Platform has a high safety margin that others can’t offer. With an industry-leading 40-second jack deployment system and full operational envelope with a mere 13’-8” jack spread on a short 245” wheelbase, E-ONE’s 95 Platform out performs the competition. Structural Safety Factor: 2.5 to 1 Jack Spread: 13' 8" Outrigger Deployment: 40 Second Gallon Water Tank: 300-500 FEATURES CUSTOM CHASSIS Quest® or cyclone® II chassis Medium, long and extended length 4-door cabs…

HP 78

E-ONE’s HP 78 features a 825 lb tip load for increased rescue capability and additional reach of similar products in its class. The ToughTruss™ ladder design features extruded aluminum construction that exceeds NFPA’s 1901 requirements with a 2.5 to 1 structural safety factor. No other manufacturer consistently offers you this commitment to safety. In addition, the aluminum aerial will not rust, need painting, or require rung cover replacement, delivering lower life-cycle cost than steel aerials. With the combination of generous compartmentation, ground ladder storage, hosebed and tank size, the HP 78 outperforms, outmaneuvers and out-reaches the competition. Structural Safety Factor:…

HP 75

E-ONE’s HP 75 features an extruded aluminum ladder that exceeds NFPA’s 1901 requirements with a 2.5 to 1 structural safety factor. In addition, the aluminum aerial will not rust and never needs re-painting or rung cover replacements. As such, E-ONE’s HP 75 delivers lower life-cycle cost than steel aerials. Like all E-ONE aerials, the HP 75 is available on one of the industry’s three most trusted custom chassis – Typhoon®, Cyclone® II, and the Quest®. With the combination of generous compartmentation, ground ladder storage, hosebed and tank size, the HP 75 out performs, out maneuvers and provides greater value than…