Greenwood Emergency Vehicles – Page 21 – Greenwood Emergency Vehicles, LLC

TYPE II AMBULANCE – Crusader Plus

Crusader Plus The Wheeled Coach Crusader Plus Ambulance. Offering more driver and passenger room, as well as increased payload capacities. FOR MORE SPECS. CLICK HERE. FEATURES Printed Circuit Board Eliminates more than 300 wire crimps and connections to minimize failure areas. More Room Driver and front passenger seats offer 3" additional seat travel over previous models. Stand-Up Oxygen Rack Located at the rear of the squad bench. AVW Grille Assembly Patented design maximizes air flow for cooling systems and protects your speakers and warning lights. WARRANTY Lifetime Electrical Warranty Wheeled Coach proves its commitment to quality and durability with an…

TYPE I AMBULANCE

Each of our Type I vehicles is computer-designed and manufactured to perform under the most demanding circumstances. FOR MORE SPECS. CLICK HERE. FEATURES Maximum Capacity Full range of chassis choices to meet the specific payload requirements of your application. Corner Cap Lights Provides 360-degree lighting coverage. Also available with optional strobe or LED package. Seamless Doors New reinforced, smooth operating pan-formed style doors feature non-adhesive extruded gaskets with new Max-Grip automotive door handles. WARRANTY Lifetime Electrical Warranty Wheeled Coach proves its commitment to quality and durability with an exclusive Lifetime Electrical Warranty, standard on all Wheeled Coach units. And this…

MEDIUM DUTY AMBULANCE

Unparalleled in durability and payload capacity, Horton’s Medium Duty offerings provide the best in chassis choice. Crews facing hilly terrain or long treks to the hospital depend on Medium Duty trucks for their superior performance. With the lowest loading height available for an ambulance, the International 4300 chassis is available as a 603 (167" body) or 623 (173") body. Customize with a choice of pass-through or walk-through, crash barrier configuration and more. Each of our Medium Duty vehicles come standard with: Horton's exclusive occupant protection system (HOPS) for rollover crashes Extra sound and thermal protection Intelliplex, our multiplexed electrical system…

TYPE III AMBULANCE

With the comfort of a car-like ride and a tight turning radius, the Type III remains a popular choice in today's market. These van cutaway chassis offer a variety of headroom options and the ability to modify to suit your needs. And choice is not limited just to the exterior, as each model offers numerous compartment and cabinet configurations, from standard designs to fully-customized creations. Each of our Type III vehicles come standard with: Horton's exclusive occupant protection system (HOPS) for rollover crashes Extra sound and thermal protection Intelliplex, our multiplexed electrical system VI-Tech mounting system Contact the sales department…

TYPE I AMBULANCE – MODEL 623

Offering ample interior and exterior space, Model 623 is our largest standard body paired with the capability of a medium duty chassis. CHASSIS International Ford F-550/650 Freightliner Kenworth HEADROOM 72 TOTAL STORAGE 212.05 cu ft IN/OUTSIDE 30.09 cu ft WIDTH 96" LENGTH 173" EXTERIOR 102.85 cu ft MAIN WALL 74.05 cu ft Contact the sales department for more info. 508-695-7138

TYPE I AMBULANCE – MODEL 603

Widely recognized as the "workhorse" of the Fire/EMS world, Horton’s Type I ambulance offers all the added benefits of a truck chassis. Applicable for both large city fleets and small rural areas, Type I vehicles provide dependable support and optional rugged four-wheel drive power. Each of our Type I vehicles come standard with: Horton's exclusive occupant protection system (HOPS) for rollover crashes Extra sound and thermal protection Intelliplex, our multiplexed electrical system VI-Tech mounting system MODEL 603 Model 603 offers a variation of the Horton body, designed to fit the space needs of your department. Body style A/B CHASSIS…

Light Rescue

E-ONE’s optional 7-door layout and the 9-door configurations are available with roll up or hinged doors and multiple compartment storage and organization options. Pull-out tool boards and roll-out trays maintain organization while storing all the necessary first response and advanced life-saving equipment. Construction: All-welded HP Engine: 550 Extruded Aluminum Body: 3/16" FEATURES CHASSIS Ford® F-550 2-door, 2-door extended, or 4-door cab GMC® 5500 175,000 lb GVWR 4x2 6.0L diesel engine 5-speed automatic transmission Bumper extensions Crewguard as standard [/kc_column_text][kc_column_text] BODY CONSTRUCTION Corrosion-resistant extruded aluminum Spacious compartments Adjustable or fixed shelves and roll-out trays Large open rear compartment Roll…

Walk-In Rescue

The versatility and durability of an E-ONE Walk-In Rescue allows your department to respond with more than just a tool box on wheels. The Walk-In Rescue is available with optional features such as awnings, under body compartments, scene lighting, camera packages, generators and breathing air systems. Available in both extruded aluminum and stainless steel, E-ONE Walk-In Rescues meet or exceed NFPA standards to protect those individuals risking their lives while serving others. The Quest®, Cyclone® II, Typhoon®: 3 Industry-Leading Chassis HP Engine: Up to 600 Extruded Aluminum or Stainless Steel: Material Options FEATURES ROOF TOP Light tower with deflector…

NON Walk-In Rescue

The E-ONE Non Walk-In Rescue allows first responders to arrive on the scene prepared. Whether responding to a natural disaster or homeland security threat, this Non Walk-In Rescue stores everything from generators to scene lighting and can be outfitted with the latest communications technology. The E-ONE Non Walk-In ensures all necessary gear is stored neatly with optional rooftop compartments, under-body compartments and a recessed pan. E-ONE engineers custom extruded aluminum and stainless steel products that meet or exceed NFPA standards to protect individuals risking their lives to serve those in need. And by offering our Non Walk-In on one of…

Typhoon

The Typhoon® chassis boasts the same proven roll-cage cab design as all E-ONE custom chassis but, through pre-engineered models and options, offers an affordable custom chassis for budget-conscious departments. The Typhoon offers three cab lengths, multiple seating configurations, various internal storage options, lighting packages and three vista roof heights. Engine choices encompass an impressive range of up to 450-HP with the 3000 series Allison transmission. Extruded Aluminum Cab: 3/16" Roll Cage Cab: Integral Horsepower: 330-450 HP Cramp Angle: 45 Degrees INTERIOR The typhoon is available with the standard Abs dash and door panels or a heavy-duty cab interior featuring…

Cyclone

Each E-ONE cab is designed and built with a structural cage design to provide maximum protection and comfort for firefighters. Structural extrusions including sub-frames, a full flange wishbone frame rail, center uprights, and crossbeam extrusions are engineered for optimum performance. Horizontal and vertical supports handle severe vertical loads which can occur in accidents. The perimeter skin material is made of 3/16” aluminum-alloy sheet for added strength, including the doors. Whether it’s a 10.25” c-channel frame pumper or the exclusive integral torque box chassis, the Cyclone offers one of the best handling chassis in the industry. The Cyclone is available in…

Quest

The Quest cab is designed to be stronger, more spacious, comfortable and ergonomic with an expansive 3728 square inches of front windshield for increased visibility, as well as offering a robust option set to meet your department’s storage and performance needs. And each E-ONE cab is designed and built with a structural cage design to provide maximum protection and comfort for firefighters. Structural extrusions including sub-frames, a full flange wishbone frame rail, center uprights, and crossbeam extrusions are engineered for optimum performance. Horizontal and vertical supports handle severe vertical loads which can occur in accidents. The perimeter skin material is…

Commercial Tanker

Commercial tankers are manufactured with the same proven technology and superior quality associated with all e-one apparatus. E-ONE tankers are rugged yet easy-to-operate vehicles designed to meet demanding suburban, rural and urban-interface operational needs. E-ONE commercial tankers are available on two- or four-door Freightliner®, International® or Kenworth® chassis with all-welded extruded-aluminum body and poly tanks. Tank designs range from full width or narrow, rectangular wetside or dryside and tank sizes range from 1500-to3500-gallons with stainless steel plumbing. Commercial tanker pumps range from 500- to 1250-gpm in side-mount modules or under tank configurations. Gallon Tank: Up to 3500 HP Engine: Up…

Custom Tanker

Custom tankers are available in both 3/16” extruded aluminum and stainless steel bodies on three of the industry’s strongest custom cabs – the Quest®, Cyclone® II and Typhoon®. Tank designs range from full width or narrow, rectangular wetside or dryside in ranges from 1500 to 3500 gallons. Pumps are available from 500 to 2000 gpm with top mount or side mount controls and stainless steel plumbing. Gallon Tank: Up to 3500 HP Engine: Up to 600 Extruded Aluminum Body: 3/16" GPM Pump: Up to 2000 FEATURES CHASSIS Quest®, Cyclone® ii or typhoon® chassis Medium, long and extended length 4-door cabs…

Water Master

Featuring a unique self-filling vacuum system, Water Master vacuum tankers can be filled at up to 2000 gallons per minute without a class a pumper. The tankers can self-fill from up to three suction inlets using almost any alternative water source including ponds, rivers, lakes, ditches and swimming pools. Featuring baffled aluminum tanks holding up to 4000 gallons of water the Water Master comes standard with a vacuum pump allowing one operator to maintain a flow rate of 250 gallons per minute or more at the fire scene while traveling over a three mile shuttle route from a water source. …

Wetside Tanker

E-ONE Tankers are rugged yet compact, easy-to-operate vehicles designed to meet demanding suburban, rural and urban-interface operational needs. The Wetside Tanker features an all-welded extruded aluminum body with a welded poly tank. These units are available on Freightliner®, International®, and Kenworth® chassis. Tank designs range from full width or narrow, rectangular wetsides. Tank sizes range from 2000- to 4000-gallons with stainless steel plumbing. The pumps range from 500- to 1000-GPM with Hale® or Darley® pumps. The pump systems are available in side-mount module or under tank configuration. FEATURES CHASSIS Kenworth, Freightliner or International chassis Up to 380 HP engine Center…

Stainless Steel Pumper

E-One recently acquired the operational assets of a stainless steel fire apparatus manufacturer based in Hamburg, N. Y., with more than 37 years of stainless steel design and manufacturing experience. The dedicated stainless steel production facility and team of experienced employees combined with E-One's full line of proven products will allow E-One to further meet the varying needs of our customers by offering the option of aluminum or stainless steel construction. E-One's stainless steel apparatus body is made entirely of stainless steel, including hinged doors and the sub-frame, making E-One stainless steel units some of the most durable on the…

Custom Pumper

E-ONE’s Custom Pumpers offer a wide variety of internal storage options to keep fire suppression and rescue equipment organized and protected from the elements. E-ONE pumpers allow you to fight fires and respond to all the emergencies in between. And at E-ONE, safety is never secondary. Which is why our roll cage cab, CrewGuard® and ABS are standard with available options such as airbags and G4™ electronic stability control. Gallon Tanks: Up to 1530 HP Engine: Up to 600 The Quest, Cyclone II, & Typhoon: 3 Industry-Leading Chassis GPM Pumps: Up to 2000 FEATURES CUSTOM CHASSIS Quest®, cyclone® ii or…

Commercial Pumper

E-ONE commercial pumpers offer the perfect combination of Quality, Performance and Flexibility to meet your department’s operational and budgetary needs. Quality – commercial pumpers are fully engineered for prompt delivery, easy service and reduced cost over the life of your department’s apparatus. Performance – E-ONE partners with the most reliable commercial chassis manufacturers in the industry to pair with our proven extruded aluminum body design. Flexibility – commercial pumpers offer a variety of storage options, compartment configurations, uniquely designed shelves, trays and pull-out boards to keep your ladders and equipment clean and protected from the elements as well as easy…

Rear Mount

With the E-ONE® rear-mount pumper, the operator has full view of the scene due to the rearward, side-facing or rear pump panel design. By placing the pump and the pump operator panel at the rear of the apparatus, the wheel base is significantly reduced, improving maneuverability. This makes the E-ONE rear-mount pumper ideal for getting around narrow street corners and subdivisions. This configuration is available with tank capacities up to 1030-gallons along with internal and external storage for NFPA ladders and equipment. Quest®, Cyclone® II, hush® mid-Engine, Typhoon® or commercial chassis available Hale®, Waterous® or Darley® pumps; foam and…

Rescue Pumper

E-ONE® Rescue pumpers feature the same versatility, durability and safety found in each E-ONE pumper but offer more room for vital equipment. With a wide variety of internal storage options to keep your fire suppression and rescue equipment organized and protected from the elements, the E-ONE Rescue pumper allows you to fight fires and respond to all the emergencies in between. Quest®, Cyclone® II, Typhoon®, or commercial chassis available Side-mount or Top-mount pump controls Hale®, Waterous® and Darley® pumps; foam and CAFS available 530- to 1,280-gallon water tank capacity - rectangular tank allows for full height/full depth compartments and/or ground…

Super Tiller

The E-ONE Super Tiller with V-Max® cab is a 100 ft. tillered aerial ladder boasting a 550 lb tip-load at the end while flowing water in all positions. V-Max Cab is designed for optimal visibility and has an enclosed flip-up “buddy seat” for driver training. The tiller cab also features air-conditioning, heat and defrost as standard. The air ride tiller axle and custom-designed steering system are engineered to enhance the tiller’s maneuverability on congested, uneven streets. The Super Tiller also offers a single set of outriggers with 17’-6” jack spread, standard short jack system for deployment in confined spaces and…

HP 100

With a 500 gallon water tank, this first responder is ready to fight the moment it arrives on scene. The HP 100 has a structural safety factor of 2.5 to 1, exceeding NFPA requirements. The HP 100’s body is available in a traditional center hosebed or the sought after SideStacker®We also offer a truck company body option, with no pump or tank, which makes the HP 100 a valuable asset to any department. Structural Safety Factor: 2.5 to 1 Jack Spread: 12' Wheelbase: 230" Gallon Water Tank: 500 FEATURES CUSTOM CHASSIS Quest® or cyclone® II chassis Medium, long and extended length…

95 Platform

The 95 Platform performs with a narrow stabilizer spread, expansive compartment space, easy-to-use SideStacker® hosebed and low maintenance aerial that all combine to provide a reliable, hardworking platform. The 95 Platform has a high safety margin that others can’t offer. With an industry-leading 40-second jack deployment system and full operational envelope with a mere 13’-8” jack spread on a short 245” wheelbase, E-ONE’s 95 Platform out performs the competition. Structural Safety Factor: 2.5 to 1 Jack Spread: 13' 8" Outrigger Deployment: 40 Second Gallon Water Tank: 300-500 FEATURES CUSTOM CHASSIS Quest® or cyclone® II chassis Medium, long and extended length 4-door cabs…

HP 78

E-ONE’s HP 78 features a 825 lb tip load for increased rescue capability and additional reach of similar products in its class. The ToughTruss™ ladder design features extruded aluminum construction that exceeds NFPA’s 1901 requirements with a 2.5 to 1 structural safety factor. No other manufacturer consistently offers you this commitment to safety. In addition, the aluminum aerial will not rust, need painting, or require rung cover replacement, delivering lower life-cycle cost than steel aerials. With the combination of generous compartmentation, ground ladder storage, hosebed and tank size, the HP 78 outperforms, outmaneuvers and out-reaches the competition. Structural Safety Factor:…

HP 75

E-ONE’s HP 75 features an extruded aluminum ladder that exceeds NFPA’s 1901 requirements with a 2.5 to 1 structural safety factor. In addition, the aluminum aerial will not rust and never needs re-painting or rung cover replacements. As such, E-ONE’s HP 75 delivers lower life-cycle cost than steel aerials. Like all E-ONE aerials, the HP 75 is available on one of the industry’s three most trusted custom chassis – Typhoon®, Cyclone® II, and the Quest®. With the combination of generous compartmentation, ground ladder storage, hosebed and tank size, the HP 75 out performs, out maneuvers and provides greater value than…

TYPE III AMBULANCE – LI 96-169 CCT Ford

TYPE III AMBULANCE - LI 96-169 CCT Ford The Leader Industries (LI 96/169 CCT) Ford Type III is a full size heavily featured model designed specifically for critical care transport. It has a highly flexible design that can accommodate most types of medical care and equipment. Complete with several redundant systems to ensure mission completion. CONVERSION A full complement of required emergency and on scene lighting to provide maximum visibility(including LED grill and intersection lights). LED turn, stop and tail lights. LED strip lighting in exterior compartments. 100,000 CP Handheld Spotlight, black rubber, halogen, hard wired. Module to be…